LED Light Box Snap Frame

Home LED Lighting LED Panel Light LED Light Box Snap Frame

LED Light Boxes

LED Light Box LED Light Box

The LED Single & Double Sided LED Light Box with Snap Frames offer bright white and RGB illumination which helps draw attention to your sign or image. Powered by innovative Samsung LED technology, this light box offers bright, even lighting in a very thin profile! Measuring 20mm which is less than 1" thick, this light box is one of the most discrete on the market. It features aluminum construction with an anodized silver finish, and is available in standard or custom sizes.

 

LED Light Box is integrated with our LED Light Panels that provide a comprehensive portfolio of applications from architectural lighting to signage applications, energy-saving while having the most uniform light output. Our product portfolio consists of RGB Light Panels, Edge-Lit Light Panel, LED Light Boxes, Edge Lit Snap Frame Panels and LED Light Panel ceiling fixtures.

 

For more information on our LED Panel Lights/LED Light Panels, contact a member of our sales team, or go to www.ledlightpanel.com/products/light-box-snap-frame.html

Light Box Features

  • Custom Color Temperatures 2700K~9000K
  • Available in RGB
  • Custom Sizes To 70” X 118” or 1800 X 3000mm
  • Custom Sizes To 51” X 157” or 1300 X 4000mm
  • 1” or 20mm Single Sided and 1.18” or30mm Double Sided
  • Samsung LED Light Engines

Light Box Benefits

  • Guaranteed Highest Light Output
  • Most Uniform Light Guide Available
  • Guaranteed Shadow Free Illumination
  • Typical One Week Production Turnover
  • Round Corners
  • Precision Machined Frame, low tolerances.
  • Industry #1 Light Box Choice!

  • Housing: LED Light Box Frame and thermal heatsink
  • Mounting: Built-on mount
  • Max Current:
  • Connection Type: 2.1mm X 5.5mm Barrel Connector, Positive Center Polarity
  • Temperature Range: -30°C to +50°C
  • Ingress Protection:
  • Color Temp Range: N/A
  • Available Colors: Cool White, RGB - Color Changing, DMX Controllable
  • CRI Value:
  • Total Lumens:
  • Weight: Depends on size
  • Dimensions: 51”W X 157” or 1300mm X 4000mm, 70”W X 118” or 1800mm X 3000mm
  • LED Brand: Samsung
  • LED Type: Samsung Light Engines
  • Cutting Unit: N/A
  • Package Length: Custom
  • Max Load:
  • Sold by Unit: Pieces
  • Beam Angles:
  • UV/IR Radiation Protection:
  • Lifespan: 50,000+ hours

Construction Diagram Single Sided

LED_Light_Box-14LED_Light_Box-14

 

1. LED Light Box Frame & Heat Sink

2. 3M Thermal Tape

3. Samsung LED Light Engine

4. 3M Construction Adhesive Tape

 

 

5. 3M Construction Adhesive Tape

6. Reflector sheet (Polyester film)

7. Acrylic Plate LED Light Guide (PMMA)

8. Poster Cover (Polycarbonate)

 


Construction Diagram Double Sided

LED_Light_Box-13LED_Light_Box-13




Add comment


Security code
Refresh

Warranty Terms & Conditions (“Warranty”)

Limited Warranty

Green LED Lighting Solutions Inc., (“GLLS”) warrants that GLLS electronic LED Light Panels will be free from defects in materials or workmanship for a period of three (3) years.

This Warranty period shall commence on the date of shipment of the relevant products from GLLS. The Warranty shall only be extended to the original purchaser of the products and/or to the first purchaser who is the end user of the products. GLLS is not responsible for any auxiliary equipment or third party products not supplied by GLLS.

Exclusions

This Warranty shall not apply to any damages caused as a result of force majeure, misuse or improper use of the products, faulty installation, poor electrical connections or negligence by any party other than GLLS. In addition, this Warranty is not applicable to any GLLS product improperly shipped, stored, installed, operated, and used, including, inter alia, shipping, storage, installation, operation and use otherwise than in accordance with one or more of the following:

(a) GLLS specifications, including for maximum operating temperature, (b) GLLS instructions and guidelines, including without limitation wiring diagrams, (c) remote applications using extended wire lengths beyond GLLS recommended limits, (d) poor or loose connections, or faulty lamp holders, (e) applicable safety standards issued by the Underwriters Laboratory (UL), as well as the UL’s Conditions of Acceptability, (f) National Electric Code (NFPA NEC) standards, (g) the applicable standards of the American National Standards Institute (ANSI), and (h) applicable federal, state and local electrical codes. Moreover, this Warranty shall not apply if any one or more of the following applies to the unit giving rise to the claim: (i) any original GLLS label or marking was partially or completely removed, covered, or altered; (ii) the unit was subjected to abnormal stresses or operating conditions; (iii) the unit had, at some time prior to the claim, not been fully paid for, or had otherwise be connected with Buyer’s breach of GLLS General Terms and Conditions of Sale; and (iv) the Buyer is in arrears to GLLS.

Disclaimer and Limitation

Except as stated herein, GLLS disclaims all other warranties and conditions, whether express, implied or statutory, including merchantability and fitness for a particular purpose, with respect to the foregoing products to the maximum extent permitted by applicable law. In no event will GLLS be liable to you or any third party for any indirect, consequential, special, punitive or exemplary damages, including, without limitation, damages for loss of business, loss of profits, business interruption or damages of associated equipment, loss of use of the GLLS unit and associated equipment, cost of substitute products, costs of removal, installation, reinstallation, testing and evaluation or shipping arising out of the use, failure of, or inability to use the products, even if GLLS has been advised of the possibility of such 

damages. GLLS liability with respect to any claim of any kind for loss or damages arising out of or related to a breach of Warranty for a unit shall in no event exceed the actual purchase price of the specific unit giving rise to the claim.

To Obtain Warranty Service

In the event that any of the warranted products fail to comply with the Warranty during the applicable Warranty period, please contact GLLS to report the non-compliance and verify Warranty coverage. In the event that GLLS issues a Return Merchandise Authorization (“RMA”) number, you must comply with the product return procedure and ensure that the RMA number accompanies the product. GLLS may, in its sole discretion, repair or replace products determined to eligible for Warranty coverage, or may issue a credit for the purchase of replacement products.





1. LED Light Box Frame & Heat Sink
2. 3M Thermal Tape
3. Samsung LED Light Engine
4. 3M Construction Adhesive Tape
5. 3M Construction Adhesive Tape
6. Reflector sheet (Polyester film)
7. Acrylic Plate LED Light Guide (PMMA)
8. Poster Cover (Polycarbonate)